Aerogel Thermal Insulation Fabric 800J Water Poof Fireproof 3mm 6mm 10mm

Aerogels Flexible Thermal Insulation Aerogel 800J

Product Introduction

Aerogel was first created by Samuel Stephens Kistler in 1931, as a result of a bet[8] with Charles Learned over who could replace the liquid in "jellies" with gas without causing shrinkage.

Aerogels are produced by extracting the liquid component of a gel through supercritical drying. This allows the liquid to be slowly dried off without causing the solid matrix in the gel to collapse from capillary action, as would happen with conventional evaporation. The first aerogels were produced from silica gels. Kistler's later work involved aerogels based on alumina, chromia and tin dioxide. Carbon aerogels were first developed in the late 1980s.Aerogel is not a single material with a set chemical formula; instead, the term is used to group all materials with a certain geometric structure.

Excellent Performance

1. Low thermal conductivity is only 1/3 to 1/5 of traditional materials.

2. Drowning rate >99.5% moisture absorption rate <0.5%.

3. High fire rating: fire performance A1, smokeless, no droplets, no harmful gases.

4. Green environmental protection: non-toxic materials without corrosion.

5. Convenient construction: aerogels are thin, tensile and compressive. Low density and light weight. The utility knife can be cut without the need for professional tools and equipment.

6. Long service life: aerogel has a unique three-position network structure, long-term use shrinkage rate ≤1% at 650°C, and no melt sintering, powdering, aerogel is an inorganic material, UV long-term exposure is not aging, weather resistance Good service life can reach more than 20 years.

Product Specification

800J